1. BS 6043-3.1.2:1999 ISO 8007-2:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 3: Electrodes - Section 3.1 Sampling - Subsection 3.1.2Sampling of anodes

2. BS 6043-3.2:1997 ISO 9088:1997. Methods of Sampling and test for carbonaceous materials used in aluminium manufacture - Part 3: Electrodes - Section 3.2 Determination of density of cathode blocks and prebaked anodes

3. BS 6043-3.3:2000 ISO 12985-1:2000. Methods of sampling and test for raw materials used in aluminium manufacture -Part 36: Electrodes - Section 3.3 Determination of the bulk density (apparent density) of cathode blocks and prebaked

4. BS 6043-3.4:2000 ISO 12985-2:2000. Methods of sampling and test for raw materials used in aluminium manufacture - Part 3: Electrodes - Section 3.4

5. BS 6043-3.6:2000 ISO 11713:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 3: Electrodes - Section 3.6

6. BS 6043-3.8.1:2001 ISO 12988-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 3: Electrodes - Section 3.8 Carboxy reactivity of prebaked anodes

7. BS 6043-3.9.1:2002 ISO 12989-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 3.9.1: Electrodes - Chemical reactivity to air of prebaked anodes - Determination of the reactivity

8. BS 6043-4.0:1991. Methods of sampling and test for Carbonaceous materials used in aluminium manufacture - Part 4: Cold ramming pastes - Section 4.0 General introduction

9. BS 6043-4.1:2000 ISO 14422:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 4: Cold ramming pastes - Section 4.1 Methods of sampling

10. BS 6043-4.10:1991. Methods of sampling and test for Carbonaceous materials used in aluminium manufacture - Part 4: Cold ramming pastes - Section 4.10 Determination of the apparent porosity of baked rammed paste